Handlekurv
0 varer i handlevognen totalt: 0,00
Det er ingen produkt i din handlevogn

DIV MAGNETISKE START BOXER & DRY CONTACTS

Product Model: Magnetic Starter Box 1Phase 220V/3
Product Description: Magnetic Starter Box 1Phase 220V/3 is suitable for single phase 220V AC Electrical applicance and can make manually or remotely control of the appliances.
Product Introduction:
The Magnetic Starter Box (220VAC,Single phase,3 in 1) is suitable for single phase 220V AC marine Electrical applicance and can make manually or remotely control of the appliances.In the event of failure in remote control, users can make manual control for the ON/OFF of the appliances.According to the boat standard requirement, Magnetic Starter box must have remotely switching function on Bridge(should be controlled from the wheel house). Traditional magnetic starter box need connect with Bridge by cables and configures with  mechanic switch and indicator lights , which needs many circuits and cables and makes maintenance not convenient.The Magnetic Starter Box developed by APM Technologies can directly and remotely monitor by Monitoring &Servisoring Panel or Mobile devices via CAN Bus, saving cables, mechanic swicth or indicators, space, materials and installation cost.
Magnetic Starter Box 1Phase 220V/3 is  integrated with remote control, overload protection and other functions. It has the advantages of high-level integration, simple appliance installation & power distribution, superior performance, complete protection measures, safe and reliable, exquisite appearance and so forth.
Product Features:
● Support for NMEA 2000 communications protocol.
● Intuitively display the status on Monitoring panels (MP1500 or MSP700)
● Control Modes:  support for Manual & Automatic Remote control.
● Protections:OCP, High temperature overload protection, Voltage loss protection.
● With CAN communication ports, users can directly and remotely monitor by  Monitoring & Supervisoring Panel.
● Space saving.
 
Product Model: MDC 300
Product Description: MDC 300 Marine Dry Contact is a type of electrical switch with ON/OFF switch status. There is no polarity between the two contact points of the appliance, and hence the points are interchangeable.
Product Introduction:
MDC300 Marine Dry Contact is a type of electrical switch with ON/OFF switch status. Since there is no polarity between the two contact points of the appliance, the points are interchangeable. The MDC300 also supports for the NMEA2000 communications protocol. At present, APM Technologies has the 15-inch MSP1500 and the 7-inch MSP700 to support for the monitoring process described herein.
Areas of Application:
For the centralized collection and management of navigation information for boats and yachts.
Product Features:
Support for NMEA 2000 communications protocol.
● Support for 16A of DC switching current, and guard against 100A of surge current.
● Aluminum outer case, exquisite & lightweight, and easy to install.
 
Product Model: MSDC 900
Product Description: MSDC 900 Marine Magnetic Starter Dry Contact with 9 channels is used to connect with the Marine Smart Navigation Panel through the CANBus for achieving the remote control of the startup and halt of up to 9 channels of magnetic starter.
Product Description:
MSDC 900 Marine Magnetic Starter Dry Contact with 9 channels is used to connect with the Marine Smart Navigation Panel through the CANBus for achieving the remote control of the startup and halt of up to 9 channels of magnetic starter. Currently APM Technologies has the 15-inch MSP1500 and the 7-inch MSP700 to support for the above-mentioned monitoring process.
Application Areas:
It is used for the marine power supply system of yachts and other marine applications.
Product Features:
●Support for NMEA 2000 communications protocol.

●Support for remote control of the ON/OFF of 1 - 9 channels of magnetic starter.
●Wall-mounted installation, convenient to install & easy to maintain.

 

 

Sorter visning på:

Ingen tilsvarende produkt